Ultimaker Print Core CC Ultimaker 0.40mm - Indicate Technologies
Ultimaker Print Core CC Ultimaker 0.60mm - Indicate Technologies
Ultimaker Print Core CC Ultimaker 0.40mm - Indicate Technologies
Ultimaker Print Core CC Ultimaker 0.60mm - Indicate Technologies

Print Core CC

$313.95
Save {}Sold out

Ultimaker Print Core CC is the extruder used with abrasive build materials, available in 0.40mm and 0.60mm nozzle diameters. Print Cores are compatible with the Ultimaker S3, S5, S5 Pro Bundle, S7 and S7 Pro Bundle 3D printers. The design of the Print Cores make them easy to swap in-and-out of the print head.

Nozzle Size:
  • 0.40mm
  • 0.60mm
SKU: 226602

More about UltiMaker print cores

Compatibility

FAQs

Please Note

Compatibility

Print Cores for use with Ultimaker S3, S5, S5 Pro Bundle, S7, and S7 Pro Bundle.

AA Print Cores: for use with build materials, available in 0.25mm, 0.40mm, and 0.80mm nozzle diameters.

BB Print Cores: for use with PVA water-soluble support material, available in 0.40mm and 0.80mm nozzle diameters.

CC Print Core: for use with abrasive build materials, available in 0.40mm and 0.60mm nozzle diameter.
Ultimaker_Print_Cores_CC

FAQs

Why can’t the nozzle be changed to a different size?
The nozzle is integrated into the Print Core. It is not recommended to disassemble Print Cores, as the internal components are fragile and assembled with specific force.

What is a print core?
This is the name of the cartridge placed in the print head of the Ultimaker S3, S5, S5 Pro Bundle, S7 and S7 Pro Bundle. The Print Core is the entire hot-end, with a chip built-in to communicate and sync with the printer, which contains information about the Print Core type and runtime statistics. The design of the Print Core makes it easy to change.
Ultimaker_Print_Cores_CC

Please Note:

- CC Print Cores are compatible for printing abrasive materials on Ultimaker S3, S5 and S7 models only, Ultimaker 3 / 3 Extended models do not feature a hardened feeder for abrasive materials

- Printing CPE+ and PC with .8mm Print Cores is considered experimental, and printing Breakaway support material is not supported

- Printing PC and PP with .25mm Print Cores is considered experimental, and printing CPE+, TPU 95A, and Breakaway support material is not supported
Ultimaker_Print_Cores_CC

Watch the featured video