S7 - 3D Printers - UltiMaker - Indicate Technologies
S7 - 3D Printers - UltiMaker - Indicate Technologies
S7 - 3D Printers - UltiMaker - Indicate Technologies
S7 - 3D Printers - UltiMaker - Indicate Technologies
S7 - 3D Printers - UltiMaker - Indicate Technologies
S7 - 3D Printers - UltiMaker - Indicate Technologies
S7 - 3D Printers - UltiMaker - Indicate Technologies
S7 - 3D Printers - UltiMaker - Indicate Technologies


Save {}Sold out

The S7 is the latest flagship model from UltiMaker improving on all that made the S5 successful, now with an integrated Air Manager, an upgraded print head, an enhanced build stack with a flexible build plate, and improved insulation for the most reliable 3D printing experience to date. Add the Material Station to make an S7 Pro Bundle and take professional 3D printing productivity to the next level.



  • Large build volume: 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches)
  • Integrated Air Manager
  • PEI coated flexible Build Plate
  • 1080p HD Camera
  • Down to 20 micron (0.001 inch) layer resolution
  • Open filament system – print with any 2.85 mm material
  • 4.7-inch award-winning touchscreen interface


Compatible Materials

  • General Purpose Materials: PLA, Tough PLA, PETG
  • Engineering Materials: ABS, Nylon, TPU 95A, PC, PP, CPE, CPE+
  • Composite Materials: PET-CF
  •  Support Materials: PVA, Breakaway
  •  Third-party materials are also compatible.
  • S7
  • S7 Pro Bundle
SKU: 234152

Product Features 

Integrated Air Manager 
Removes up to 95% of ultrafine particles during prints increasing air and print quality thanks to the enclosed build chamber and single glass door. 

Anti-flood sensor
The redesigned print head detects potential flooding earlier. Strong magnets ensure the print core door stays closed.

1080p camera
Monitor your print in high resolution remotely via UltiMaker Digital Factory. Mounted high for great views of the first layers.

Inductive build plate sensor
This new sensor probes the build plate with less noise and more accuracy. Automatic tilt compensation removes the need for thumbscrew bed calibration. Together, these two allow for a perfect first layer.
PEI coated flexible build plate
Skip the glue and remove parts effortlessly with the PEI-coated flexible build plate. 25 magnets and 4 alignment pins allow you to easily replace it.

Print with 280+ materials
Material profiles in the UltiMaker Marketplace have been tested for thousands of hours by their manufacturers and users in the field.

Cura integration
UltiMaker Cura features speed up your workflow and increase print success –  with intent profiles, easy remote printing, and more.

Future-proof investment
New 3D printing workflow improvements are already planned via regular software and firmware updates for years to come.

Technical Specifications


Printer Properties

Operation Parameters


Service and Support


Build Volume
330 x 240 x 300 mm
(13 x 9.4 x 11.8 in)

Assembled dimensions
495 x 585 x 780 mm
(19.5 x 23 x 30.7 in)

Print technology
Fused filament fabrication (FFF)
Compatible filament diameter
2.85 mm

29.1 kg (64.2 lbs)

Power input
100 - 240 VAC, 50 - 60 Hz

Maximum power output

Printer Properties

Layer Resolution
0.25 mm nozzle: 150 - 60 micron
0.4 mm nozzle: 200 - 20 micron
0.6 mm nozzle: 300 - 20 micron
0.8 mm nozzle: 600 - 20 micron

XYZ resolution
6.9, 6.9, 2.5 micron

Feeder type
Dual-geared feeder, reinforced for composite materials

4.7-inch (11.9 cm) color touchscreen

Print core replacement
Swappable print cores

Print head
Dual extrusion print head with an auto-nozzle lifting system, swappable print cores, and flood detection.

Nozzle diameters
0.4 mm (included)
0.25 mm, 0.6 mm, 0.8 mm (sold separately)


Operation Parameters

Filter technology
Replaceable EPA filter

Air Extraction Rate
1 - 50 m³/h (35 m³/h nominal rate for most materials at 23 °C)

Build speed
< 24 mm3/s

Nozzle temperature
180 - 280 °C

Nozzle heat up time
< 2 minutes

Operating sound
< 51 dBA
Build plate leveling
Advanced active leveling with more accurate inductive sensors

Build plate
PEI-coated flexible steel build plate (20-140°C)

Build plate heat up time
< 5 minutes (from 20 to 60 °C)

Operating ambient temperature
15 - 32 °C (59 - 90 °F)

Non-operating temperature
0 - 32 °C (32 - 90 °F)


Supplied Free Software
UltiMaker Cura – print preparation software/full settings and monitoring compatibility
UltiMaker Digital Factory – remote printer management software
UltiMaker Academy - (3D Printing e-learning modules)

Plugin Integration
SolidWorks, Siemens NX, Autodesk Inventor

Supported OS
MacOS, Windows, and Linux

Supported File Types
UltiMaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG
Printable formats: G, GCODE, GCODE.gz, UFP

File Transfer
Wi-Fi (2.4 and 5 GHz), Ethernet, USB


Service and Support

Training is available online through Ultimaker Academy

Warranty period
12 months, Extended warranty available

Expert Support 
Market-leading technical support via email, phone, or from our global community is available to you in your language and timezone.

Extended Support
Online resources, extensive manuals, material technical and safety data sheets (in multiple languages), a detailed knowledge base, and much more

CE, FCC, VPAT, RoHS, REACH, CB, BIS, KC, PSE, RCM, SRRC, MIC, NCC, Safe unattended professional use

Introducing the UltiMaker S7